These crimping tools are suitable for a wide range of connectors up to 400 sqmm using die sets common to the Cembre 130 kN tooling range.
New Li-Ion 18V batteries offer a higher capacity than 14.4V, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping.
A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety.
The OLED display provides essential real time tool operating information data including:
- Crimping pressure and force being generated, for confirmation of adherence to norms and best practice
- Battery power availability
- Tool identification, LED work light state, reset, no. of operational and service crimping cycles
- Tool service required to maintain optimum condition.
Designed with improved balance, these crimping tools are easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area.
Crimping cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by
USB interface.
Operating temperature: -15 to +50°C
|
Model |
B 15MD |
B 35-50MD |
B 500 |
B 1350-C |
B 1350L-C |
|
Picture |
 |
|
 |
 |
 |
|
Force |
15kN = 1,5T |
35kN = 3,5T |
63kN = 6,3T |
132kN = 13,2T |
132kN = 13,2T |
|
Battery |
18V Li-Ion 2,0Ah |
18V Li-Ion 2,0Ah |
18V Li-Ion 4,0Ah |
18V Li-Ion 4,0Ah |
18V Li-Ion 4,0Ah |
|
Jaw |
C type Rotate 3400 |
Open Rotate 1800 |
Open Rotate 1800 |
C type Rotate 1800 |
C type Rotate 1800 |
|
Jaw opening |
- |
- |
- |
25mm |
42mm |
|
Capacity |
Up to 35mm2 |
Up to 150mm2 |
Up to 300mm2 |
Up to 400mm2 |
Up to 400mm2 |
|
Dimension |
L337mm x H133mm x W81mm |
L387mm x H133mm x W81mm |
L300mm x H343mm x W83mm |
L338mm x H344mm x W83mm |
L395mm x H372mm x W83mm |
|
Weight |
1,74kg |
2,6kg |
4,2kg |
6,5kg |
8,1kg |
|
Accessories |
The tool is supplied as: • Basic tool with battery and wrist strap • Spare battery • Battery charger • Plastic carrying case suitable for storing the tool and accessories
|
The tool is supplied as: • Basic tool with battery and wrist strap • Spare battery • Battery charger • Plastic carrying case suitable for storing the tool and accessories
|
The tool is supplied as: • Basic tool with battery and shoulder strap • Spare battery • Battery charger • USB cable • Plastic carrying case suitable for storing the tool and 14 die sets
|
The tool is supplied as: • Basic tool with battery and shoulder strap • Spare battery • Battery charger • USB cable • Plastic carrying case suitable for storing the tool and 8 die sets
|
The tool is supplied as: • Basic tool with battery and shoulder strap • Spare battery • Battery charger • USB cable • Plastic carrying case suitable for storing the tool and 8 die sets
|
|
Crimping dies |
- Hexagonal dies: to 16mm2. - Oval dies: to 35mm2. |
- Hexagonal dies: to 150mm2. - Oval dies: to 95mm2. |
- Hexagonal dies: to 300mm2. - Oval dies: to 120mm2. |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
|
Model |
B 1350-UC |
B 1300-C |
B 1300L-C |
B 1300-UC |
|
Picture |
 |
 |
 |
 |
| Force |
132kN = 13,2T |
132kN = 13,2T |
132kN = 13,2T |
132kN = 13,2T |
|
Battery |
18V Li-Ion 4,0Ah |
18V Li-Ion 4,0Ah |
18V Li-Ion 4,0Ah |
18V Li-Ion 4,0Ah |
|
Jaw |
Open Rotate 1800 |
C type Rotate 1800 |
C type Rotate 1800 |
Open Rotate 1800 |
|
Jaw opening |
- |
25mm |
42mm |
- |
|
Capacity |
Up to 400mm2 |
Up to 400mm2 |
Up to 400mm2 |
Up to 400mm2 |
|
Dimension |
L351mm x H369mm x W83mm |
L406mm x H239mm x W102,5mm |
L471mm x H239mm x W102,5mm |
L423mm x H239mm x W102,5mm |
|
Weight |
5,9kg |
6,5kg |
8,0kg |
6,5kg |
|
Accessories |
The tool is supplied as: • Basic tool with battery and shoulder strap • Spare battery • Battery charger • USB cable • Plastic carrying case suitable for storing the tool and 8 die sets
|
The tool is supplied as: • Battery charger • Plastic carrying case suitable for storing the tool and 12 die sets
|
The tool is supplied as: • Battery charger
|
The tool is supplied as: • Battery charger • Plastic carrying case suitable for storing the tool and 12 die sets
|
|
Crimping dies |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
- Hexagonal dies: to 400mm2. - Oval dies: to 185mm2. |
